Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2018
XC90 (16-) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313990301.1039792215, 39792214, 39792213, 39848680, 39848679, 39848678, 39848677, 39848675, 39848674, 39848670, 39848666, 31399240, 39837548, 39837547, 39837546, 39837545, 39837550, 39837549, 39837555, 39837554, 39837553, 39837551, 39837557, 31408233, 39837556
Skid plate




IMG-396891




 

Materials

Designation

Part number

Cleaning agent

1161721

Primer

1161727


Equipment
IMG-345497
IMG-240693
IMG-239980
IMG-256903
IMG-239664
IMG-239667
IMG-268803

IMG-393133

IMG-443777


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

When installing, the car must retain a temperature of 20 degrees C.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Accessory installation

 

Vehicles WITH BOTH Parking assistance (PAS) AND Foot movement detection (FMDM)

4
IMG-242268
 

Note!
Risk of mix-up! Check that correct software is chosen for download.

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31414746

 

Vehicles with JUST Parking assistance (PAS), WITHOUT Foot movement detection (FMDM)

5
IMG-242268
 

Note!
Risk of mix-up! Check that correct software is chosen for download.

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31414665

 

All vehicles

6
IMG-396886
 
 

Removal

 

Concerns front Skidplate

7
IMG-392964
 

Note!
The screws are to be reused.

Remove the screws.

On both sides.

8
IMG-392958
 

Remove the screws.

Loosen the clip.

9
IMG-393125
 

Fold marked part aside.

10
IMG-387143
 

Remove the clips.

11
IMG-397010
 

Remove the screws.

Remove the marked part.

12
IMG-397035
 

Remove the cable harness clips.

13
IMG-397036
 

Remove the cable harness clips.

14
IMG-397037
 

Remove the cable harness clips.

15
IMG-393134
 

Remove the marked part.

The part is to be reused.

On both sides.

 

Vehicles with Front Fog Lamps

16
IMG-392968
 

Disconnect the connector.

Remove the cable harness clips.

17
IMG-397054
 

Disconnect the connector.

Remove the cable harness clips.

18
IMG-393126
 

Remove the screws.

Remove the marked part.

The part is to be reused.

On both sides.

19
IMG-392972
 

Release the catches.

Remove the marked part.

The part is to be reused.

On both sides.

 

Vehicles with parking assistance

20
IMG-393127
 

Remove the marked part.

Disconnect the connector.

On both sides.

21
IMG-393128
 

Release the catches.

Remove the marked part.

The part is to be reused.

On both sides.

 

All vehicles

22
IMG-383170
 

Fold marked part aside.

Remove the part carefully

On both sides.

23
IMG-396314
 

Loosen the clips.

The part is to be reused.

24
IMG-383194
 

Remove the marked part.

The part is not to be reused.

25
IMG-393322
 

Remove the cable harness clips.

Repeat on the other side.

 

Accessory installation

26
IMG-396316
 

Install the clip(s).

On both sides.

27
IMG-393130
 

Install component that comes with the accessory kit.

28
IMG-393322
 

Fasten the wiring harness using the existing clips.

On both sides.

 

Vehicles with parking assistance

29
IMG-397090
 

Remove the marked part.

On both sides.

Use: Air-powered air saw

30
IMG-393131
 

Reinstall the removed part.

31
IMG-393132
 

Install component that comes with the accessory kit.

Connect the connector.

32
IMG-393324
 

Reinstall the removed part.

33
IMG-393323
 

Install component that comes with the accessory kit.

Connect the connector.

34
IMG-377070
 

Reinstall the removed parts in reverse order.

 

Concerns rear Skidplate

35
IMG-396894
 

Note!
Orientation view

 

Removal

36
IMG-383914
 

Remove the screws.

On both sides.

37
IMG-381901
 

Remove the screws.

38
IMG-383913
 

Loosen the clip.

39
IMG-392936
 

Release the catches.

On both sides.

40
IMG-396385
 
41
IMG-392940
 

Note!
This step is easier with two people.

Remove the marked part.

42
IMG-397189
 

Remove the clips.

The part is to be reused.

On both sides.

43
IMG-397881
 

  1. Release the catches.

  2. Remove the marked part.

Repeat on the other side.

The part is not to be reused.

44
IMG-397885
 

Caution!
The part is to be reused.

  1. Release the catches.

  2. Remove the marked part.

Repeat on the other side.

 

Orientation view

45
IMG-383969
 
 

Vehicles with Foot movement detection (FMDM)

46
IMG-395851
 

Disconnect the connector.

47
IMG-397041
 

Loosen the screws.

Release the catches.

Remove the marked part.

The part is to be reused.

 

Vehicles with parking assistance

48
IMG-395840
 

Note!
Do not remove the connectors.

Remove the cable tie(s).

Remove the part carefully

Repeat on the other side.

49
IMG-406367
 

Note!
Do not remove the connectors.

Remove the cable tie(s).

Remove the part carefully

Repeat on the other side.

 

Vehicle without actuator

50
IMG-397092
 

Measure and mark as illustrated.

Remove the marked detail/details.

Use: Pipe cutter

 

Vehicles with actuator, early version

51
IMG-397091
 

Measure and mark as illustrated.

Remove the marked part.

Use: Pipe cutter

52
IMG-392927
 

Disconnect the connector.

Loosen the nut.

Remove the marked part.

53
IMG-443653
 

Remove the nuts.

Remove the marked part.

The part is to be reused.

 

Vehicles with actuator, late version

54
IMG-444301
 

Measure and mark as illustrated.

Remove the marked part.

Use: Pipe cutter

55
IMG-443657
 

Disconnect the connector.

Loosen the clip.

56
IMG-444310
 

Locate relevant marking.

Remove the marked part.

Use: Pipe cutter

57
IMG-443659
 

Remove the nuts.

Remove the marked part.

The part is to be reused.

 

Accessory installation

 

All vehicles

58
IMG-397104
 

Note!
Do not fully tighten the nut yet.

Install component that comes with the accessory kit.

Tighten the nut.

 

Vehicle without actuator

59
IMG-397121
 

Note!
Do not fully tighten the nut yet.

Install component that comes with the accessory kit.

Tighten the nut.

 

Vehicles with actuator, early version

60
IMG-445316
 

Note!
Note the position.

61
IMG-445315
 

Reinstall the removed part.

Tighten the nuts.


Tightening torque: Actuator, to Exhaust system , 5 Nm

62
IMG-392925
 

Caution!
Be extra careful when removing or installing this component.

Reinstall the removed part.

63
IMG-397111
 

Note!
Do not fully tighten the nut yet.

Install component that comes with the accessory kit.

Tighten the nut.

Connect the connector.

Install the clip(s).

 

Vehicles with actuator, late version

64
IMG-445317
 

Note!
Note the position.

65
IMG-443713
 

Reinstall the removed part.

Tighten the nuts.


Tightening torque: Actuator, to Exhaust system , 5 Nm

66
IMG-443790
 

Note!
Do not fully tighten the nut yet.

Install component that comes with the accessory kit.

Tighten the nut.

Connect the connector.

Install the clip(s).

 

All vehicles

67
IMG-384344
 

Install component that comes with the accessory kit.

68
IMG-384347
 

Install component that comes with the accessory kit.

69
IMG-401050
 

Note!
Make sure to follow the sequence indicated.

Repeat on the other side.

 

Vehicles with folding towbar

70
IMG-400604
 

Cut following the dotted lines.

 

Vehicles with fixed towbar

71
IMG-400608
 

Cut following the dotted lines.

 

Vehicles with towbar, Hitch

72
IMG-400605
 

Cut following the dotted lines.

 

Vehicles with Foot movement detection (FMDM)

73
IMG-397138
 

Clean the surface.

Use: 1161721, Cleaning agent

74
IMG-397138
 

Apply a thin and even layer.

Use: 1161727, Primer

75
IMG-384168
 

Remove the protective film.

76
IMG-384148
 

Note!
Note the position.


Hint
Press and apply pressure to the part over the tape for at least 20 seconds.

Install component that comes with the accessory kit.

77
IMG-384288
 

Remove the marked part.

 

Removal

78
IMG-406368
 

Note!
Do not remove the connectors.

Remove the marked part.

The part is to be reused.

 

Installation

79
IMG-384394
 

Note!
Make sure that the connection/connections point downwards.

Reinstall the removed part.

Position/route the cables as illustrated.

 

Accessory installation

80
IMG-406405
 

Note!
Orientation view

81
IMG-384804
 

Note!
Orientation view

82
IMG-406400
 

Install component that comes with the accessory kit.

Connect the connector.

Route the wire adjacent to existing wirings.

Tighten the cable ties.

83
IMG-406403
 

Route the wire adjacent to existing wirings.

Tighten the cable tie.

 

Vehicles with parking assistance

84
IMG-395885
 

Route the wire adjacent to existing wirings.

Tighten the cable ties.

On both sides.

85
IMG-406410
 

Note!
This step is easier with two people.

Place the component where indicated in the graphic.

86
IMG-406406
 

Reinstall the removed part.

Repeat on the other side.

87
IMG-406408
 

Reinstall the removed part.

Repeat on the other side.

 

All vehicles

88
IMG-393101
 

Note!
This step is easier with two people.

89
IMG-397189
 

Reinstall the clips.

On both sides.

90
IMG-393100
 

Repeat on the other side.

91
IMG-397890
 

Reinstall the removed part.

Repeat on the other side.

92
IMG-383914
 

Reinstall the screws.

On both sides.

93
IMG-393105
 

Reinstall the removed part.

94
IMG-381901
 

Reinstall the screws.

 

Vehicles with Foot movement detection (FMDM)

95
IMG-420100
 

Position/route the cable harness as illustrated.

Connect the connector.

Tighten the cable ties.

 

Setting

 

All vehicles

96
IMG-393095
 

Note!
Note the position.

97
IMG-396589
 

Use: Vernier caliper

98
IMG-393088
 

Tighten to the value stated.


Tightening torque: M10 , 50 Nm

99
IMG-393085
 

Note!
Note the position.

100
IMG-396585
 

Use: Vernier caliper

 

Vehicle without actuator

101
IMG-393097
 

Tighten to the value stated.


Tightening torque: M10 , 50 Nm

 

Vehicles with actuator, early version

102
IMG-393090
 

Tighten the nut.


Tightening torque: ,

 

Vehicles with actuator, late version

103
IMG-393097
 

Tighten to the value stated.


Tightening torque: M10 , 50 Nm

 

All vehicles

104
IMG-400598
 

Caution!
Make sure that the surface is clean and free of foreign material.

Wax the component indicated.

105
IMG-400599
 

Caution!
Make sure that the surface is clean and free of foreign material.

Wax the component indicated.

 

Check

106
IMG-434130
 

Note!
Make sure that trunk lid is only opened by a foot movement under the car.

Check for correct operation.

© Volvo Car CorporationSkid plate- 31399030 - V1.10
volvocars.com
Lifestyle Collection
Deutsch
Find a Dealer
Austria

Copyright © 2020 Volvo Cars. All rights reserved.

Copyright | Legal Disclaimer | Privacy Policy | Cookies