Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 2017
V90 (17-) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
321479131.132207835
Protective plate, beneath the engine




 

Special tools

 

981 4112 Drill

Tool number:981 4112

Tool description:Drill

Tool boards:EU99

 

951 2782 Rivet nut tool

Tool number:951 2782

Tool description:Rivet nut tool

Tool boards:08


Materials

Designation

Part number

Rust inhibitor, low viscosity


Equipment
IMG-345497
IMG-239664
IMG-239660
IMG-239681

IMG-468729


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-465413
 
  1. Remove the screws.

  2. Remove the clips.

The part is not to be reused.

4
IMG-387158
 

Remove the panel.

The part is not to be reused.

5
IMG-468734
 

Remove the screw.

Repeat on the other side.

6
IMG-468736
 

Remove the marked detail/details.

 

Accessory installation

7
IMG-468516
 

Warning!
Wear protective gloves.


Warning!
Wear safety goggles.

Drill the holes.


Use special tool: T9814112, Drill

8
IMG-468518
 

Warning!
Wear protective gloves.


Warning!
Wear safety goggles.

Drill the holes.

9
IMG-468519
 

Use: , Rust inhibitor, low viscosity

10
IMG-468520
 

Note!
Orientation view

11
IMG-372305
 


Use special tool: T9512782, Rivet nut tool

Reset the tool.

12
IMG-464604
 
13
IMG-367098
 

Use hands only.

The outermost thread of the tool should be flush with the rivet nut end.

14
IMG-372295
 

Press the tool against the surface.

Hold the tool at right angles to the surface.

15
IMG-372296
 

Tighten to the value stated.

16
IMG-373060
 

Measure

Use: Vernier caliper

17
IMG-464561
 

Install components that come with the accessory kit.

Repeat on the other side.

18
IMG-464568
 

Note!
Do not fully tighten the bolts.

Install components that come with the accessory kit.

Use the black screws.

Repeat on the other side.

19
IMG-468738
 

Note!
Orientation view

20
IMG-468742
 

Note!
Do not fully tighten the bolts.

Install the screws.

Repeat on the other side.

21
IMG-468534
 

Note!
Do not fully tighten the bolts.

Install the screws.

22
IMG-468534
 

Tighten the bolts.


Tightening torque: M10 , 50 Nm

23
IMG-468523
 

Tighten the bolts.


Tightening torque: M8 , 24 Nm

24
IMG-468533
 

Tighten the bolts.


Tightening torque: M10 , 50 Nm