| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | IMG-363036 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
| | |
| | There may be parts in the accessories kit that are not needed for this installation. |
| | |
| | IMG-245980 |
|
| | Set the ignition key to position 0. |
| | IMG-361731 |
|
| | |
| | IMG-368970 |
|
| | |
| | IMG-370275 |
|
| | |
| | IMG-368979 |
|
| | |
| | IMG-370274 |
|
| | |
| | IMG-361756 |
|
| | |
| | IMG-361757 |
|
| | |
| | IMG-373699 |
|
| | |
| | IMG-373728 |
|
| | Remove the panel. Remove the part carefully |
| | IMG-368726 |
|
| | |
| | IMG-371226 |
|
| | |
| | IMG-371229 |
|
| | |
| | IMG-371228 |
|
| | |
| | IMG-367433 |
|
| | Disconnect the connectors. |
| | IMG-373740 |
|
| | |
| | IMG-373741 |
|
| | The part is to be reused. |
| | IMG-346175 |
|
| | Note! The number of connectors may vary depending on the vehicle's equipment level. |
Disconnect the connectors. |
| | IMG-356461 |
|
| | |
| | IMG-369020 |
|
| | Repeat on the other side. |
| | Vehicles with heated rear seat |
| | IMG-369022 |
|
| | |
| | IMG-369029 |
|
| | Locate the connector. Disconnect the connector. Repeat on the other side. |
| | |
| | IMG-372960 |
|
| | |
| | IMG-366386 |
|
| | |
| | IMG-366507 |
|
| | |
| | IMG-369055 |
|
| | |
| | IMG-369878 |
|
| | |
| | IMG-369034 |
|
| | |
| | IMG-369033 |
|
| | |
| | IMG-369048 |
|
| | |
| | IMG-369049 |
|
| | |
| | IMG-368833 |
|
| | |
| | IMG-360944 |
|
| | Repeat on the other side. |
| | IMG-360951 |
|
| | |
| | IMG-366366 |
|
| | |
| | IMG-355946 |
|
| | |
| | IMG-356006 |
|
| | |
| | IMG-373747 |
|
| | |
| | IMG-373748 |
|
| | Disconnect the connector. |
| | IMG-369934 |
|
| | |
| | IMG-369005 |
|
| | |
| | IMG-369090 |
|
| | |
| | IMG-373808 |
|
| | |
| | IMG-373809 |
|
| | |
| | IMG-373811 |
|
| | |
| | |
| | IMG-369103 |
|
| | |
| | IMG-369106 |
|
| | |
| | IMG-369108 |
|
| | Route the cable harness to the existing cable harness. |
| | IMG-369501 |
|
| | |
| | IMG-369113 |
|
| | |
| | IMG-369114 |
|
| | Route the cable harness to the existing cable harness. |
| | IMG-369502 |
|
| | |
| | IMG-369115 |
|
| | |
| | IMG-369117 |
|
| | Use special tool: T9512932, Tension spring
|
| | IMG-369118 |
|
| | |
| | IMG-369121 |
|
| | Route the cable harness to the existing cable harness. |
| | IMG-369503 |
|
| | |
| | IMG-369389 |
|
| | |
| | IMG-369504 |
|
| | |
| | IMG-369505 |
|
| | |
| | IMG-369392 |
|
| | Use special tool: T9512932, Tension spring
Pull the wiring through. |
| | |
| | IMG-369394 |
|
| | |
| | IMG-369406 |
|
| | |
| | IMG-369405 |
|
| | |
| | IMG-373763 |
|
| | |
| | IMG-373740 |
|
| | |
| | Reinstall the removed parts in reverse order. |
| | |
| | IMG-368833 |
|
| | |
| | IMG-354954 |
|
| | |
| | IMG-369941 |
|
| | |
| | IMG-369939 |
|
| | |
| | IMG-369954 |
|
| | |
| | IMG-369944 |
|
| | |
| | IMG-369955 |
|
| | |
| | IMG-369539 |
|
| | |
| | IMG-369567 |
|
| | Remove the screw. On both sides. |
| | IMG-369568 |
|
| | |
| | IMG-370001 |
|
| | |
| | IMG-369594 |
|
| | Carefully pry loose the bottom edge of the panel and then continue around the panel. |
| | IMG-369774 |
|
| | |
| | IMG-373768 |
|
| | Disconnect the connector. |
| | IMG-370030 |
|
| | |
| | IMG-369597 |
|
| | Caution! Make sure that the motor is in the park position. |
Remove the nut. |
| | IMG-369604 |
|
| | Use special tool: T9814088, Puller
|
| | IMG-369609 |
|
| | Disconnect the connector. |
| | IMG-369652 |
|
| | Disconnect the connector. |
| | IMG-369615 |
|
| | Disconnect the connector. |
| | IMG-369612 |
|
| | |
| | IMG-369614 |
|
| | |
| | IMG-369616 |
|
| | |
| | IMG-369649 |
|
| | |
| | IMG-369650 |
|
| | Note! The clips consist of two parts. |
Remove the panel. |
| | |
| | IMG-369748 |
|
| | |
| | IMG-369724 |
|
| | Install the nuts Tightening torque: M6
, 10 Nm
|
| | IMG-369725 |
|
| | |
| | IMG-369730 |
|
| | Install the screws. Tightening torque: M6
, 10 Nm
|
| | IMG-369743 |
|
| | |
| | IMG-369744 |
|
| | |
| | IMG-369746 |
|
| | |
| | Reinstall the removed parts in reverse order. |
| | IMG-356526 |
|
| | |
| | IMG-356597 |
|
| | |
| | IMG-356582 |
|
| | |
| | IMG-366013 |
|
| | |
| | IMG-393693 |
|
| | Install component that comes with the accessory kit. |
| | Reinstall the removed parts in reverse order. |
| | IMG-242268 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number. Order and download software according to: 31330702
|