| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | IMG-363036 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
| | |
| | IMG-382528 |
|
| | |
| | IMG-404645 |
|
| | |
| | IMG-404650 |
|
| | |
| | IMG-404655 |
|
| | |
| | IMG-382204 |
|
| | Remove the clips. Remove the screws. Remove the marked part. |
| | IMG-387143 |
|
| | |
| | IMG-392033 |
|
| | |
| | IMG-391976 |
|
| | Note! Close the drain cock after the coolant has drained. |
Place a container under the car. Drain the coolant. |
| | IMG-403416 |
|
| | |
| | IMG-403425 |
|
| | Remove the marked part. Use: Pliers
|
| | IMG-403428 |
|
| | |
| | IMG-403430 |
|
| | |
| | IMG-398442 |
|
| | Remove the screws. Remove the clips. |
| | IMG-398445 |
|
| | Remove the nuts. Remove the screw. |
| | IMG-398443 |
|
| | Remove the screws. Remove the marked part. |
| | IMG-398446 |
|
| | Remove the screw. Remove the clips. |
| | IMG-397073 |
|
| | |
| | |
| | IMG-398765 |
|
| | |
| | IMG-399407 |
|
| | Locate relevant marking. Use: Air-powered air saw
Adjust the hole with a file or knife as necessary. |
| | IMG-404675 |
|
| | Install component that comes with the accessory kit. Pull the wiring through. |
| | IMG-392461 |
|
| | Install component that comes with the accessory kit. Use hands only.
|
| | IMG-404682 |
|
| | |
| | IMG-392261 |
|
| | |
| | IMG-391301 |
|
| | Install the clip(s). Tighten the cable tie. |
| | IMG-391565 |
|
| | |
| | IMG-391573 |
|
| | Release the catches. Fold marked part aside. |
| | IMG-391924 |
|
| | Remove the nut. The part is to be reused. |
| | IMG-404695 |
|
| | Connect the prerouted cable. |
| | IMG-404700 |
|
| | Install the nut. Tightening torque: M6
, 10 Nm
|
| | IMG-391930 |
|
| | Press until a click is heard. |
| | IMG-391915 |
|
| | Caution! No grease on contact surfaces. |
Lubricate the O-ring. |
| | IMG-405625 |
|
| | Install component that comes with the accessory kit. Connect the cable. |
| | IMG-405626 |
|
| | |
| | IMG-391381 |
|
| | Install the clip(s). Tighten the cable tie. |
| | IMG-403850 |
|
| | |
| | IMG-391380 |
|
| | Install the clip(s). Tighten the cable tie. |
| | IMG-391395 |
|
| | Caution! Cut carefully to avoid unintentional damage or personal injury. |
|
| | IMG-391422 |
|
| | Install component that comes with the accessory kit. |
| | IMG-391908 |
|
| | Tighten the screw. Tightening torque: M6
, 10 Nm
|
| | IMG-391906 |
|
| | Remove the screw. The part is to be reused. |
| | IMG-391910 |
|
| | Fold marked part aside. Install component that comes with the accessory kit. Tighten the screw.
|
| | IMG-391420 |
|
| | Install component that comes with the accessory kit. Tighten the hose clamps. |
| | IMG-391915 |
|
| | Caution! No grease on contact surfaces. |
Lubricate the O-ring. |
| | IMG-391913 |
|
| | Connect the connector. Install the catch. |
| | |
| | IMG-404661 |
|
| | Note! Always follow the manufacturer's instructions when handling the equipment. |
Use special tool: T9512955, Cover
Use special tool: T9512957, Coolant Reservoir
Fill with coolant and run the engine to operating temperature. Post-fill the cooling system if necessary. |
| | IMG-377070 |
|
| | Reinstall the removed parts in reverse order. |
| | IMG-405228 |
|
| | Note! Make sure to follow the sequence indicated. |
Tightening torque: Aluminum wheel rim to wheel hub Stage 1:
4 Nm Stage 2:
50 Nm Stage 3:
140 Nm
|