2014 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 2014
V40 (13-) 2014

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313168881.339822315, 39814261, 39817978, 39817980, 39817981, 39817982, 39817983, 39817984, 39817991, 39818005, 39818006, 39818007, 39818009, 39818912, 31352530, 39818941, 39822314, 39822313, 39822312, 39822311, 39822310, 39818920, 39814263, 39823006
Deflector, rear




IMG-354707




Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-345497
IMG-239660
IMG-239940
IMG-239681

IMG-370683


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-354709
 

Clean the Bumper Cover surface.

Use: 1161721, Isopropanol

4
IMG-354710
 

Remove the screws.

5
 

Repeat the steps when removing on opposite side.

 

Accessory installation

6
IMG-354711
 
7
IMG-356027
 
8
IMG-370663
 

Use tape

9
IMG-356051
 
10
IMG-354712
 
11
IMG-370666
 

Locate the markings for the positions.

12
IMG-370667
 

Drill one hole and fit one pop rivet at a time, in accordance with the sequence illustrated.

13
IMG-370690
 

Remove the tape.

14
IMG-356029
 
15
IMG-356052
 
16
IMG-370700
 

Fold the protective film forward

17
IMG-370673
 

Note!
Orientation view

18
IMG-370684
 
19
IMG-354716
 
20
IMG-370688
 

A click confirms that the component is in the correct position.

21
IMG-370689
 
22
IMG-354717
 
23
IMG-354718
 
24
IMG-354719
 
25
IMG-370691
 

Caution!
Pull carefully.

Remove the protective film.

26
IMG-356066
 

Caution!
Make sure that equal pressure is applied to the full length of the component.


Note!
Ensure that the tape is fixed to the surface.

27
 

Repeat the steps when installing accessories on opposite side.