2020 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC40 2020

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316595531.131664376
Decor panel, exterior




Equipment
IMG-345497
IMG-239667

IMG-440446


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-447645
 

Caution!
Make sure not to damage painted surfaces.

Use: Interior trim remover

4
IMG-447646
 

Remove the marked part.

5
IMG-447650
 

Caution!
Make sure not to damage painted surfaces.

Use: Interior trim remover

6
IMG-447653
 

Remove the marked part.

7
 

Repeat the steps when removing on opposite side.

 

Accessory installation

8
IMG-447648
 

Install component that comes with the accessory kit.

Ensure that all clips engage.

9
IMG-447654
 

Install component that comes with the accessory kit.

Ensure that all clips engage.

10
 

Repeat the steps when installing accessories on opposite side.