Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 2013
V40 (13-) 2013 B4164T

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313391161.531339105
Electric engine heater, passenger compartment connector




 

Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-345497
IMG-239664
IMG-239660
IMG-300203
IMG-239980
IMG-317443

IMG-370134


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332193
 

Set the ignition key to position 0.

4
IMG-356946
 

Remove the panel.

5
IMG-356947
 

Disconnect the connector.

6
IMG-358478
 
7
IMG-358482
 
8
IMG-358485
 

Fold the carpet to the side.

9
IMG-373263
 

Locate the rubber grommet under the insulating mat.

10
IMG-373265
 

Make a cut in the insulation.

11
IMG-373262
 

Fold the insulation to one side.

12
IMG-373264
 
13
IMG-358506
 

Raise the car.

  1. Remove the clips.

  2. Remove the screws.

14
IMG-358531
 
15
IMG-368369
 
16
IMG-368376
 

Remove the screws.

17
IMG-362811
 

Remove the nut.

18
IMG-371233
 

Fold the wing liner to one side.

 

Vehicles with headlamp washers

19
IMG-367834
 
20
IMG-371250
 

Note!
Orientation view

21
IMG-371252
 

Release the lock.

Remove the hose.

 

All vehicles

22
IMG-371253
 
23
IMG-371254
 

Remove the screws.

24
IMG-371255
 

Remove the nut.

25
IMG-371258
 

Fold the wing liner to one side.

 

Vehicles with headlamp washers

26
IMG-371264
 

Note!
Orientation view

27
IMG-371260
 

Remove the hose.

Take a piece of washer hose. Tie a knot in it and place it on the washer pump to prevent the washer fluid reservoir from emptying.

 

All vehicles

28
IMG-358536
 

Remove the clips.

29
IMG-371193
 

Remove the screws.

30
IMG-371266
 
31
IMG-371278
 

Note!
Orientation view

32
IMG-370089
 
33
IMG-370092
 
34
IMG-370091
 
 

Accessory installation

35
IMG-362914
 

Caution!
No grease on contact surfaces.

Use: 1161427, Low temperature grease

36
IMG-370138
 
37
IMG-370143
 

Install the catch.

38
IMG-370181
 

Caution!
No grease on contact surfaces.

Use: 1161427, Low temperature grease

39
IMG-370142
 
40
IMG-370144
 

Install the catch.

41
IMG-370146
 
42
IMG-370149
 

Install the catch.

43
IMG-370151
 
44
IMG-370150
 
45
IMG-370168
 
46
IMG-370170
 
47
IMG-370171
 
48
IMG-371477
 

Note!
Orientation view

49
IMG-371561
 
50
IMG-371666
 
51
IMG-371560
 
52
IMG-371673
 
53
IMG-371539
 
54
IMG-363762
 
55
IMG-363746
 
56
IMG-370379
 
57
IMG-371530
 
58
IMG-363851
 
59
IMG-370222
 
60
IMG-370243
 
61
IMG-373274
 

Make a cut in the insulation.

62
IMG-373284
 

Fold the insulation to one side.

63
IMG-370368
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

64
IMG-373356
 
65
IMG-362914
 

Caution!
No grease on contact surfaces.

Use: 1161427, Low temperature grease

66
IMG-370220
 
67
IMG-370221
 

Install the catch.

68
IMG-362686
 

Fold the insulation to one side.

69
IMG-374797
 

Remove the screw.

70
IMG-370213
 
71
IMG-371338
 

Refit the insulation.

72
IMG-371306
 

Make a cut in the insulation.

73
IMG-371379
 

Fold the floor carpet back.

74
IMG-371433
 

Make a cut in the mat.

75
IMG-371462
 

Fold the carpet back towards the bracket.

Install the screws.

76
 

Reinstall the removed parts in reverse order.

77
IMG-370207
 

On both sides.

78
IMG-370203