Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 2013
V40 (13-) 2013 D4162T

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313391141.231408217, 31373327, 31339102
Electric engine heater, 230 V




 

Materials

Designation

Part number

Grease

1161761


Equipment
IMG-345497
IMG-239664
IMG-239660

IMG-363711

IMG-362782


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332193
 

Set the ignition key to position 0.

4
IMG-362805
 

Open the hood.

5
IMG-362807
 
6
IMG-368369
 
7
IMG-368376
 

Remove the screws.

8
IMG-362811
 
9
IMG-341914
 

Fold the wing liner aside.

 

Accessory installation

10
IMG-362821
 

Clean the Bumper Cover surface.

11
IMG-367884
 

Take the template from the kit and cut it out following the dotted line.

12
IMG-367857
 
13
IMG-362828
 
14
IMG-362839
 

Use tape

15
IMG-362840
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.

16
IMG-367881
 
17
IMG-362843
 
18
IMG-367882
 
19
IMG-363401
 
 

Removal

20
IMG-358506
 
  1. Remove the clips.

  2. Remove the screws.

21
IMG-358531
 
22
IMG-341914
 

Fold the wing liner aside.

 

Accessory installation

23
IMG-363726
 
24
IMG-363728
 
25
IMG-363736
 
26
IMG-363731
 
27
IMG-363738
 
28
IMG-363737
 
29
IMG-363739
 
30
IMG-363762
 
31
IMG-363746
 
32
IMG-363761
 
33
IMG-363851
 
34
IMG-362914
 

Caution!
No grease on contact surfaces.

Lubricate the O-ring.

Use: 1161761, Grease

35
IMG-363861
 
36
IMG-363866
 
37
IMG-363891
 

Install the cable.

 

Removal

38
IMG-363766
 
39
IMG-351773
 

Place a container under the car.

Drain the coolant.

 

Accessory installation

40
IMG-363925
 
41
IMG-363927
 

Lubricate the O-ring.

Use: 1161761, Grease

42
IMG-363781
 
43
IMG-363931
 
44
IMG-362914
 

Caution!
No grease on contact surfaces.

Lubricate the O-ring.

Use: 1161761, Grease

45
IMG-363801
 
46
IMG-363832
 
47
IMG-367891
 

Caution!
Make sure to locate the wiring in such a way that contact with any moving components is avoided.

Install the cable.

 

Installation

48
IMG-363206
 

Fill with coolant and run the engine to operating temperature.

Vent the cooling system and check for leakage.

Post-fill the cooling system if necessary.

49
 

Reinstall the removed parts in reverse order.

50
IMG-370207
 
51
IMG-370203