Installation Instructions

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2018
XC90 (16-) 2018 B4204T27, XC90 (16-) 2018 D4204T6, XC90 (16-) 2018 D4204T14, XC90 (16-) 2018 B4204T20, XC90 (16-) 2018 B4204T23, XC90 (16-) 2018 D4204T23, XC90 (16-) 2018 B4204T34, XC90 (16-) 2018 B4204T26, XC90 (16-) 2018 B4204T29

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314148471.031470777, 31470781
Tablet holder




 
Equipment
A0000162
IMG-239664

IMG-431285

IMG-432652


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
 

Note!
The removal steps may contain installation details.

5
IMG-394500
 
6
IMG-394038
 

Remove the screws.

7
IMG-394018
 

Note!
The graphic shows the back of the component before removal.

8
IMG-394039
 

Note!
Perform the procedure one side at a time.

9
IMG-394056
 
10
IMG-399420
 
11
IMG-403590
 

The image shows seat without upholstery.

Release the locks.

Remove the marked part.

12
IMG-403751
 

Note!
The graphic shows the back of the component before removal.

13
IMG-403745
 
 

Accessory installation

14
IMG-405590
 

Install component that comes with the accessory kit.

Ensure that all clips engage.

15
IMG-431288
 

Pull the wiring harness through.

16
IMG-419177
 

Connect the connector.

17
IMG-431290
 

Make sure that the gasket is correctly located.

18
IMG-405870
 
19
IMG-405800
 

Note!
Maximum 2 turns.

Install the screws.

20
IMG-407172
 
21
IMG-408170
 

Note!
This step is easier with two people.

Adjust to the specified value.

22
IMG-407175
 

Note!
This step is easier with two people.

Tighten the bolts.

23
IMG-407176
 

Position/route the cable harness as illustrated.

24
IMG-406221
 

Note!
Orientation view

25
IMG-407340
 

Caution!
Pull up the upholstery to cover lower part of bracket.

26
IMG-407341
 

Caution!
Press the foam padding upward against the upholstery.

27
IMG-405592
 

Caution!
Check that the component has locked in its bottom position.

28
IMG-414067
 

Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between.

Compare with upholstery and head restraint on the other front seat.

29
IMG-413617
 

Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between.

Compare with upholstery and head restraint on the other front seat.

If adjustment is necessary, follow the procedure described in the method step below.

30
IMG-407341
 

Caution!
Press the foam padding upward against the upholstery.

31
IMG-420877
 

Place the component where indicated in the graphic.

Adjust the position of the wiring harness.

32
IMG-421060
 

Install the screws.

Make sure that the gasket is correctly located.

Tighten the bolts.

33
IMG-421061
 

Install component that comes with the accessory kit.

34
IMG-419771
 

Note!
Orientation view

35
IMG-431326
 

Install component that comes with the accessory kit.

Tighten the cable ties.

36
IMG-431340
 

Connect the connector.

37
IMG-431391
 

Connect the connector.

38
IMG-431867
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

39
IMG-431868
 

Position/route the cable as illustrated.

Tighten the cable tie.

 

Removal

40
IMG-383130
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

41
IMG-397249
 
42
IMG-383129
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

43
IMG-383134
 
44
IMG-396605
 
  1. Release the connector's catch.

  2. Release the lock.

  3. Disconnect the connector.

45
IMG-396606
 

Unhook the cable harness clips.

46
IMG-403720
 

Remove the marked part.

Remove the screw.

47
 

Repeat the steps when removing on opposite side.

48
IMG-418918
 

Remove the marked part.

49
IMG-432553
 

Remove the marked part.

 

Accessory installation

50
IMG-431705
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

51
IMG-431706
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

52
IMG-432651
 

Install component that comes with the accessory kit.

Position/route the cable as illustrated.

53
IMG-394435
 

Disconnect the connector.

54
IMG-394235
 

Connect the connectors.

 

Concerns installation of accessories on both seats

55
 

Repeat the steps when removing on opposite side.

Repeat the steps when installing accessories on opposite side.

56
IMG-418959
 

Pull the wiring through.

57
IMG-418960
 

Position/route the cable as illustrated.

58
IMG-418961
 

Connect the connector.

59
IMG-429850
 

Place any excess inside the floor carpet.

 

Installation

60
 

Reinstall the removed parts in reverse order.