Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S90 2018
S90L 2018 B4204T44, S90L 2018 B4204T23, S90L 2018 B4204T27

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314708461.431470777
Tablet holder




 
Equipment
A0000162
IMG-239664

IMG-405832

IMG-407177


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
 

Note!
The removal steps may contain installation details.

5
IMG-394500
 
6
IMG-394038
 

Remove the screws.

7
IMG-394018
 

Note!
The graphic shows the back of the component before removal.

8
IMG-394039
 

Note!
Perform the procedure one side at a time.

9
IMG-394056
 
10
IMG-399420
 
11
IMG-403590
 

The image shows seat without upholstery.

Release the locks.

Remove the marked part.

12
IMG-403751
 

Note!
The graphic shows the back of the component before removal.

13
IMG-403745
 
 

Accessory installation

14
IMG-405590
 

Install component that comes with the accessory kit.

Ensure that all clips engage.

15
IMG-419176
 

Pull the wiring harness through.

16
IMG-419177
 

Connect the connector.

17
IMG-405495
 

Make sure that the gasket is correctly located.

18
IMG-405870
 
19
IMG-405800
 

Note!
Maximum 2 turns.

Install the screws.

20
IMG-407172
 
21
IMG-408170
 

Note!
This step is easier with two people.

Adjust to the specified value.

22
IMG-407175
 

Note!
This step is easier with two people.

Tighten the bolts.

23
IMG-407176
 

Position/route the cable harness as illustrated.

24
IMG-406221
 

Note!
Orientation view

25
IMG-407340
 

Caution!
Pull up the upholstery to cover lower part of bracket.

26
IMG-407341
 

Caution!
Press the foam padding upward against the upholstery.

27
IMG-405592
 

Caution!
Check that the component has locked in its bottom position.

28
IMG-414067
 

Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between.

Compare with upholstery and head restraint on the other front seat.

29
IMG-413617
 

Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between.

Compare with upholstery and head restraint on the other front seat.

If adjustment is necessary, follow the procedure described in the method step below.

30
IMG-407341
 

Caution!
Press the foam padding upward against the upholstery.

31
IMG-405657
 

Place the component where indicated in the graphic.

Adjust the position of the wiring harness.

32
IMG-405659
 

Install the screws.

Make sure that the gasket is correctly located.

Tighten the bolts.

33
IMG-405660
 
34
IMG-419771
 

Note!
Orientation view

35
IMG-418894
 

Install component that comes with the accessory kit.

Tighten the cable ties.

36
IMG-418895
 

Connect the connectors.

Tighten the cable ties.

37
IMG-418896
 

Position/route the cable as illustrated.

Install the cables.

Use a cable tie

38
IMG-408595
 

Note!
Note the position.

Tighten the cable tie.

39
IMG-418897
 

Position/route the cable as illustrated.

 

Removal

40
IMG-383130
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

41
IMG-397249
 
42
IMG-383129
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

43
IMG-383134
 
44
IMG-396605
 
  1. Release the connector's catch.

  2. Release the lock.

  3. Disconnect the connector.

45
IMG-396606
 

Unhook the cable harness clips.

46
IMG-403720
 

Remove the marked part.

Remove the screw.

47
IMG-397252
 
48
IMG-418918
 

Remove the marked part.

 

Accessory installation

49
IMG-418920
 

Position/route the cables as illustrated.

50
IMG-418919
 

Reinstall the removed part.

51
IMG-418925
 

Route the wires adjacent to existing wirings.

Install the cables.

Use a cable tie

52
IMG-418930
 

Connect the connector.

53
IMG-418931
 

Tighten the cable tie.

54
IMG-418957
 

Position/route the cable as illustrated.

 

Concerns installation of accessories on both seats

55
 

Repeat the steps when removing on opposite side.

Repeat the steps when installing accessories on opposite side.

56
IMG-383708
 

Remove the marked part.

 

All vehicles

57
IMG-383729
 

Remove the marked part.

 

Vehicles with 2-zone Air Conditioning system A/C

58
IMG-394435
 

Disconnect the connector.

59
IMG-394235
 

Connect the connectors.

 

Vehicles with 4-zone Air Conditioning system A/C

60
IMG-419565
 

Connect the connectors.

 

Concerns installation of accessories on both seats

61
IMG-418959
 

Pull the wiring through.

62
IMG-418960
 

Position/route the cable as illustrated.

63
IMG-418961
 

Connect the connector.

 

All vehicles

64
IMG-406061
 

Connect the connector.

65
IMG-406062
 

Install the wiring harness.

66
IMG-408610
 

Reinstall the removed part.

Install the screw.

67
IMG-406070
 

Place any excess inside the floor carpet.

 

Concerns installation of accessories on both seats

68
 

Repeat the steps when installing accessories on opposite side.

 

Installation

69
 

Reinstall the removed parts in reverse order.