L.H.D

Инструкция по установке

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90
(03-) 2003

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
91623721.130746011
Switch alarm




D3800673




Equipment
A0000162

D3800672


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Preparations

1
A8800136
 

Preparations

  • Turn the ignition switch to position 0.

  • Disconnect the battery negative lead.


    Note!

    Wait at least five minutes before disassembling the connectors or removing other electrical equipment.


 

Installing the switch

2A
R8504177
2B
R8504178
 

Installing the switch

Illustration A

  • Remove the blind cover plug from the 12V socket

  • Take a scriber with an angled point. Insert the angled end of the scriber in the joint underneath, on one side of the surround for the switch unit.

Illustration B

  • Carefully pull out the surround from underneath using the scriber. The surround is secured with three mounting lugs at the top and lower edges.


Note!

Do not damage the surround.


  • Place the surround to one side.


Hint

The surround with three button spaces can be replaced with a surround with seven button spaces if necessary. This can be purchased separately.


3
D8502226
 

  • Remove the switch blank. Install the new switch (1) in any location

  • Reinstall the surround and blind cover plug for the 12V socket.