2011 R.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC70 2011
XC70 (08-) 2011

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
307561421.130756146, 30756145, 30756144, 30756143
Metal pedals




IMG-309463




Equipment
IMG-239667
IMG-309504

IMG-309483

IMG-213320


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 
1
IMG-309523
 

  • Clean if necessary.

2
IMG-309623
 

  • Take the accelerator pedal cover (A) from the kit.

  • Hook the cover onto the long side of the accelerator pedal.

3A
IMG-309643
3B
IMG-309664
 

A

  • Press the cover against the pedal at the same time as folding the cover's edges over using a weatherstrip tool.

  • Check, using a mirror, that the edges of the cover have covered the pedal.

  • Pull at the cover and check that it is secure.

B

4
IMG-309665
 

Applies to cars with an automatic transmission

  • Remove the pedal cover by grasping at the lower edge and pulling off at the rear edge.

5
IMG-309666
 

  • Take the brake pedal cover (B) from the kit.

  • Hook the cover on at the upper edge.

6A
IMG-309667
6B
IMG-309668
 

A

  • Press the cover against the pedal at the same time as folding the cover's edges over using a weatherstrip tool.

  • Check, using a mirror, that the edges of the cover have covered the pedal.

  • Pull at the cover and check that it is secure.

B

7
IMG-309669
 

Applies to cars with manual gearbox

  • Remove the pedal cover by grasping at the lower edge and pulling off at the lower edge.

8
IMG-309670
 

  • Take the brake pedal cover (C) from the kit.

  • Hook the cover on at the upper edge.

9A
IMG-309671
9B
IMG-309803
 

A

  • Press the cover against the pedal at the same time as folding the cover's edges over using a weatherstrip tool.

  • Check, using a mirror, that the edges of the cover have covered the pedal. Pull at the cover to check that it is secure.

  • Repeat the steps for the clutch pedal.

B