| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\08\6c\e5.gif) | IMG-332193 |
|
| | Note!
Wait at least one minute before unplugging the connectors or removing other electrical equipment |
|
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\5e.gif) | J8504532 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\60.gif) | J8504893 |
|
| | Remove the surround from around the display and media player. Use a small screwdriver and press in the catch in one of the surround's upper corners. Carefully bend loose the surround on the same side with a plastic weatherstrip tool.
Note!
Do not damage the panel and dashboard. |
Do the same on the other side.
Hint
If the panel is difficult to remove, press the panel on both sides again and repeat the procedure starting at the other side. |
Fold the surround backwards. Remove by pulling upwards.
|
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\5f.gif) | J8504534 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\5d.gif) | IMG-263205 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\62.gif) | IMG-270743 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\61.gif) | IMG-263584 |
|
| | |
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\6d.gif) | IMG-263949 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\6e.gif) | IMG-270744 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\72.gif) | IMG-263586 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\6f.gif) | IMG-263208 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\71.gif) | IMG-263209 |
|
| | |
| | Applies to vehicles with manual transmissions |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\68.gif) | IMG-270745 |
|
| | Applies to vehicles with manual transmissions |
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\69.gif) | IMG-240085 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\6a.gif) | IMG-268148 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\6b.gif) | IMG-271448 |
|
| | |
| | Applies to vehicles with BLIS or DRIVe (not both) |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\07\42\f0.gif) | IMG-271449 |
|
| | Applies to vehicles with BLIS or DRIVe (not both) |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\07\42\ef.gif) | IMG-271450 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\08\3b\5a.gif) | IMG-345634 |
|
| | |
| | Applies to vehicles without BLIS and without DRIVe |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\07\42\f2.gif) | IMG-271451 |
|
| | Applies to vehicles without BLIS and without DRIVe Release the catches holding the switch connector and lift out. |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\07\42\f7.gif) | IMG-271452 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\07\42\f6.gif) | IMG-271453 |
|
| | Install the switch housing on the tunnel console. Take the cable harness from the kit and connect the blue connector. |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\07\42\f5.gif) | IMG-271454 |
|
| | Route the cable harness along the existing cable harness. Secure it using three cable ties. |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\86.gif) | IMG-271465 |
|
| | Connect the connector (1) from the tunnel console's cable harness to the connector (2) on the prerouted cable harness. Take a piece of foam tape from the kit and wrap it around the connected connectors.
|
| | Applies to vehicles with both BLIS and DRIVe |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\7d.gif) | IMG-271460 |
|
| | Applies to vehicles with both BLIS and DRIVe |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\7f.gif) | IMG-271461 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\81.gif) | IMG-271462 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\7a.gif) | IMG-271463 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\84.gif) | IMG-271464 |
|
| | |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\06\22\86.gif) | IMG-271465 |
|
| | Connect the connector (1) from the tunnel console's cable harness to the connector (2) on the prerouted cable harness. Take a piece of foam tape from the kit and wrap it around the connected connectors.
|
| | |
| | Applies to all vehicles Reinstall the detached components in reverse order. |
| | Applies to vehicles with both BLIS and DRIVe, as well as vehicles without BLIS and without DRIVe |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\08\6d\9e.gif) | IMG-242268 |
|
| | Applies to vehicles with both BLIS and DRIVe, as well as vehicles without BLIS and without DRIVe |
| | Applies to vehicles with BLIS or DRIVe (not both) |
| ![](/AccessoriesWeb/Accessories.mvc/Images/0000c8af\80\08\6d\9e.gif) | IMG-242268 |
|
| | Applies to vehicles with BLIS or DRIVe (not both) |