| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | There may be parts in the accessories kit that are not needed for this installation. |
| | |
| | IMG-363036 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
| | |
| | IMG-430215 |
|
| | |
| | |
| | Note! The removal steps may contain installation details. |
|
| | IMG-383769 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-431341 |
|
| | Note! Perform the procedure one side at a time. |
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
Disconnect the connector. |
| | IMG-431485 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
| | IMG-431600 |
|
| | |
| | IMG-431605 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
| | IMG-431117 |
|
| | |
| | IMG-430999 |
|
| | |
| | IMG-431005 |
|
| | Remove the screw. Tightening torque: Seat belt guide, to Bracket
, 4.5 Nm
|
| | IMG-445755 |
|
| | |
| | IMG-431100 |
|
| | |
| | IMG-431337 |
|
| | |
| | IMG-434665 |
|
| | Remove the marked detail/details. |
| | IMG-434666 |
|
| | Loosen the screws. Tightening torque: M6
, 10 Nm
|
| | IMG-434667 |
|
| | Remove the marked part. Tightening torque: M6
, 10 Nm
|
| | IMG-431336 |
|
| | Disconnect the connectors. Remove the marked part. |
| | IMG-431935 |
|
| | |
| | IMG-430326 |
|
| | Disconnect any connector(s). Remove the marked part. |
| | IMG-431455 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
| | IMG-431610 |
|
| | Caution! Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor! |
|
| | IMG-430992 |
|
| | |
| | IMG-431175 |
|
| | |
| | IMG-431460 |
|
| | |
| | IMG-431471 |
|
| | |
| | IMG-431196 |
|
| | Remove the screws. Tightening torque: Front seat to body
, 40 Nm
|
| | IMG-431176 |
|
| | |
| | IMG-431197 |
|
| | Remove the screws. Tightening torque: Front seat to body
, 40 Nm
|
| | IMG-383134 |
|
| | |
| | IMG-396605 |
|
| | Disconnect the connector. |
| | IMG-396606 |
|
| | Unhook the cable harness clips. |
| | IMG-427010 |
|
| | |
| | IMG-416201 |
|
| | Remove the screws. Fold marked part aside. Tightening torque: M6
, 10 Nm
|
| | IMG-431622 |
|
| | |
| | IMG-431640 |
|
| | |
| | IMG-431652 |
|
| | |
| | IMG-430220 |
|
| | |
| | IMG-430230 |
|
| | Remove the part carefully Repeat the steps when removing on opposite side. |
| | IMG-430255 |
|
| | |
| | IMG-387860 |
|
| | |
| | IMG-431237 |
|
| | |
| | IMG-431305 |
|
| | |
| | IMG-431275 |
|
| | Remove the screw. Repeat on the other side. |
| | IMG-431298 |
|
| | Remove the marked part. Repeat the steps when removing on opposite side. |
| | IMG-431297 |
|
| | The graphic shows the back of the component. |
| | IMG-431240 |
|
| | |
| | IMG-431327 |
|
| | The graphic shows the back of the component. |
| | IMG-431312 |
|
| | |
| | IMG-432355 |
|
| | |
| | IMG-432396 |
|
| | Remove the marked part. The part is not to be reused. |
| | IMG-432883 |
|
| | Disconnect the connector. |
| | IMG-438087 |
|
| | Remove the clips. The item is to be reused. |
| | |
| | IMG-454537 |
|
| | Use details according to image. |
| | IMG-454548 |
|
| | Caution! Make sure the component is fitted as illustrated. |
Press using manual force several times. |
| | IMG-454550 |
|
| | |
| | IMG-432945 |
|
| | |
| | IMG-454554 |
|
| | |
| | IMG-432942 |
|
| | Install the marked component. |
| | IMG-432932 |
|
| | |
| | IMG-443496 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-443500 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-388168 |
|
| | Caution! Take extra care not to crease the headliner. |
|
| | IMG-397816 |
|
| | |
| | IMG-431835 |
|
| | Loosen the marked detail/details. To be repeated in the other end of the component. |
| | IMG-431866 |
|
| | Release the catches. Loosen the marked detail/details. Use: Scribe
Use: Interior trim remover
To be repeated in the other end of the component. |
| | IMG-419675 |
|
| | Use: 988734, Cable tie, 750 mm
|
| | IMG-419680 |
|
| | |
| | IMG-432021 |
|
| | |
| | IMG-432040 |
|
| | |
| | IMG-388174 |
|
| | |
| | IMG-418850 |
|
| | Reinstall the removed part. To be repeated in the other end of the component. |
| | IMG-432875 |
|
| | Caution! Make sure that the rubber grommet seals properly to the body. |
Reinstall the removed part. To be repeated in the other end of the component. |
| | IMG-443501 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-443502 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-452252 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-443504 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-443505 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-443506 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | Right-hand drive vehicles |
| | IMG-432995 |
|
| | |
| | IMG-433050 |
|
| | |
| | IMG-433060 |
|
| | |
| | IMG-433070 |
|
| | Remove the screw. The part is to be reused. Tightening torque: M6
, 10 Nm
|
| | IMG-433165 |
|
| | Disconnect the connector. |
| | IMG-433170 |
|
| | |
| | IMG-443507 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-445018 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | |
| | IMG-443508 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | |
| | IMG-432467 |
|
| | Connect the prerouted cable. |
| | IMG-242268 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number. |
| | |
| | IMG-400000 |
|
| | Reinstall the removed parts in reverse order. |