Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Clean the Bumper Cover surface.

Use: 1161721, Isopropanol

Remove the screws.

Repeat the steps when removing on opposite side.

Accessory installation

Use tape

Locate the markings for the positions.

Drill one hole and fit one pop rivet at a time, in accordance with the sequence illustrated.

Remove the tape.

Fold the protective film forward

A click confirms that the component is in the correct position.

Remove the protective film.

Repeat the steps when installing accessories on opposite side.